We are not handymen, but by watching the video we did the assembly ourselves because we could not find a handyman. Actually, it wasn't difficult at all. Very satisfied with final result. Our steel door with frame was easy to screw into the existing situation. We drilled a few holes in the steel frame and screwed in screws. We added a spirit level and stuck in the glass with dabs of sealant. A simple system with luxurious results.
We have built a canopy at the back of the garden. Canopy Oak with black walls and fascia, finished on the floor with ipe floorboards. Supplied with pen & hole joints and with numbered 2d and 3d drawing. Finished with black walls and fascia for an even shiquer residual result. A few months later, we decided to add an ipe decking, which does make the whole look very nice.
Fence of 9.0 cm slats with gate and heavy gate posts. Our newly built house with a beautiful modern fence on the side and back. We wanted a sustainable solution but with a modern character. We succeeded and chose 9.0 cm slats. The neighbours also bought this fence a few weeks later, nice huh?
"Perfect solution for our sloping garden: Stepped slatted fencing"⭐⭐⭐⭐★"As our garden slopes significantly, we needed a fence that could follow the height difference in a sleek, modern way. This slatted system was the perfect answer. Because the posts are spaced every 1 metre, we could easily step the fence down level by level. It creates a very clean and contemporary look along the boundary. It’s great that you can lower the height by one or more slats every metre. The flexibility of this kit is excellent, and it allowed us to maintain a professional finish despite the uneven ground. Highly recommended for sloping sites!"
"Stunning Ipé urban garden: The sample box was the icing on the cake"⭐⭐⭐⭐★"What a result! Our urban garden has been completely transformed by the fence made of Ipé slats. It was a significant project, but with a bit of help, it turned out beautifully. We ordered the sample box beforehand; an impressive and luxury box that immediately convinced us of the quality. We feel the online photos represent reality perfectly, so you can trust the website with confidence. A top experience with expert staff, we’ll definitely be back next year!"
To separate the hall from the kitchen, we decided to install a steel butted door. This door is fitted in an L frame, and the hinges are attached to the frame on the side of the door. The magnetic strip provides a tight seal. Other doors in our house that are wooden also have a 1/4th compartment division hence we had the steel door made in this as well. The long handle completes the steel door for us. Super satisfied with the end result. Assembly was not difficult, look carefully and secure the frame, then hang the door in the hinge, possibly adjust the frame, fit the glass and put in the glazing bars.